Contents
SIS geometry factors
Oxygen geometry factor for individual detectors (range 0-8). "Range 0" particles stop in matrix detector 2 (M2).
Silicon geometry factor for individual detectors (range 0-8).
Iron geometry factor for individual detectors (range 0-8).
SIS functional diagram
SIS Stack Detector Physical Parameters/Hybrid Gains & Offsets
All SIS stack detectors are "single groove"; that is, they have only one active area of 65 cm².
Stack A
| (Avg.) Thickness (µm) |
(Avg.) Deadlayer (µm) |
Amplifier Gain (MeV/ch) |
Offset (ch) |
T1 |
99 |
0.71 |
0.2215 |
48.05 |
T2 |
108 |
0.86 |
0.2233 |
47.60 |
T3 |
251 |
0.64 |
0.4377 |
47.61 |
T4 |
489 |
0.43 |
0.6843 |
47.76 |
T5 |
745 |
0.58 |
1.0411 |
49.66 |
T6-1 |
1007 |
0.71 |
1.9984 |
48.33 |
T6-2 |
897 |
0.47 |
T6-3 |
747 |
0.46 |
T7-1 |
978 |
0.49 |
3.0375 |
48.55 |
T7-2 |
724 |
0.40 |
T7-3 |
513 |
0.60 |
T7-4 |
491 |
0.66 |
T7-5 |
489 |
0.53 |
T7-6 |
500 |
0.59 |
T8 |
980 |
0.49 |
0.1307 |
47.81 |
Stack B
|
T1 |
100 |
0.63 |
0.2295 |
49.03 |
T2 |
104 |
0.87 |
0.2210 |
48.40 |
T3 |
250 |
0.45 |
0.4393 |
47.61 |
T4 |
506 |
0.57 |
0.6984 |
45.73 |
T5 |
752 |
0.56 |
1.0318 |
46.35 |
T6-1 |
994 |
0.55 |
2.0404 |
45.90 |
T6-2 |
910 |
0.43 |
T6-3 |
767 |
0.49 |
T7-1 |
1006 |
0.47 |
2.9688 |
44.41 |
T7-2 |
745 |
0.54 |
T7-3 |
513 |
0.50 |
T7-4 |
481 |
0.59 |
T7-5 |
506 |
0.44 |
T7-6 |
501 |
0.46 |
T8 |
993 |
0.53 |
0.1333 |
44.12 |
Calibration Data and Thickness Maps (sample)
The final response of each telescope was tested at the GSI accelerator facility
in Darmstadt, Germany. The figure below illustrates data from one particular
beam run. Isotopes can be seen as peaks within each charge group.
Each detector was also mapped for thickness variations using both a custom-
designed interferometer system and energy deposition measurements taken at the
NSCL accelerator facility at Michigan State University. The figure below
shows examples of such maps; the contours are 1 µm each.
Resource Allocation and Nominal Detector Specifications
- Resource Allocation:
- Bit Rate: 1992 bits/sec
- Weight: ~22 kg
- Power: ~18 W
- Detector Specifications:
- Operating (Bias) Voltage:
T1/T2 | 35 V |
T3 | 60 V |
T4 | 120 V |
T5A/T5B | 200/150 V |
T6A/T6B (all) | 190/230 V |
T7A/T7B (all) | 160/210 V |
T8A/T8B | 240/200 V |
- Leakage Current @ 20°C: < 5 µA
- Operating Temperature Range: -40 to 40°C
Back to SIS homepage.
Back to CRIS/SIS homepage.
Back to Caltech SRL ACE homepage.
Last modified 12 September 1997, mrt
URL: /ACE/CRIS_SIS/sishw.html